Vita-Mix BarBoss Specifications download pdf (Page 4)

GENERAL INSTRUCTIONS

BarBoss® Advance® & Drink Machine Advance®

Pre-Set Programs

The following are settings of the six Pre-Set Programs for the BarBoss Advance

and Drink Machine Advance machines. These programs, numbered 1 through 6, are

blending cycles designed for the most commonly made drinks. Depending on the

viscosity of the drink you are creating, selecting one of the six Pre-Set Programs

will run the machine for a full cycle. The machine will stop by itself when the cycle is

complete. A cycle varies in speed and length. Your machine’s Pre-Set options may

dier due to program revisions or if your machine was programmed speciﬁcally for

your business. Due to the dierence of recipes, your results may also vary.

SETTING 1: (:15) Blends thin drinks with just juice and ice.

SETTING 2: (:18) Blends light coee drinks.

SETTING 3: (:21) Creates a specialty drink with a thick viscosity.

SETTING 4: (:24) Creates ice cream and regular coee drinks that

need a little longer blending.

SETTING 5: (:27) Blends a regular smoothie.

SETTING 6: (:30) Blends thick frozen fruits & hard ingredients

for a thick but consistent smoothie.

Blending Tips

1. Place liquids and soft foods in the container ﬁrst, solid items and ice last. Although

not necessary for processing, you may want to cut or break food into smaller pieces

for more precise measuring of ingredients. Thawed or partially thawed fruit is

recommended. High speed is recommended for heavy-duty blending.

2. Set the container on the motor base by aligning it over the centering pad anchored

to the base. (Motor must be completely stopped before positioning container).

Containers are not to be used for hard, dry materials. Avoid running your machine

with the container empty.

3. Always use a lid when blending. If blending hot ingredients, the lid must

be securely latched in place. When processing hot liquids, DO NOT use a

non-latching or one-piece lid.

4. Plug the machine into the nearest outlet (if unplugged). Press On/O switch to on.

Activate a program by selecting the desired setting on the dial and then depressing

the Start/Stop switch on the left.

• If mixture stops circulating, you have likely trapped an air bubble.

Either insert the accelerator tool (sold separately, see page 19) through

the lid while blending, or stop the motor, remove the container from the

base and stir or scrape the mixture from the sides of container into the

center using a rubber spatula to press any air bubbles away from the blades.

Replace the lid and continue blending.

• To prevent possible splashing, lightly rest your hand on the lid while

turning the machine on (except when processing hot liquids).

• Due to the blending speed of the machine, processing times are greatly

reduced over other manufacturers’ machines. Until you become accustomed to

the speed, watch your mixture carefully to avoid over-blending.

• If stopping the machine mid-cycle, use the Start/Stop switch, not the

On/O switch. If the On/O switch was used, wait 30 seconds for

power to recycle and the timer to reset before resuming operation.

5. After the blender has been stopped, wait until the blade comes to a

complete stop before removing the lid or container from the motor base.

6. To use the pulse switch to refresh drinks: Make sure the power is on.

With the container on the motor base, depress the pulse switch.

Release the switch to stop the motor.

7. Press the On/O Switch to O when not in use.

WARNINGS!

• When the machine is not in use, unplug the machine from the outlet.

• If you detect a change in the sound of the machine or if a hard or foreign object

comes into contact with the blades, do not serve the contents. Inspect your

blade assembly for loose, nicked or missing parts. If parts are loose, missing,

or nicked, replace with a new blade assembly. (See page 12.)

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Vita-Mix BarBoss Specifications Page 4

Comments to this Manuals

Related products and manuals for Blenders Vita-Mix BarBoss